{"id":1301,"date":"2020-10-09T15:55:28","date_gmt":"2020-10-09T15:55:28","guid":{"rendered":"http:\/\/www.dayuanmachinery.com\/?p=1301"},"modified":"2024-05-10T11:24:30","modified_gmt":"2024-05-10T11:24:30","slug":"mhc1100efc-1300efc-1500efc-1650ef-1900efc","status":"publish","type":"post","link":"https:\/\/www.dayuanmachinery.com\/en\/?p=1301","title":{"rendered":"MHC 1300EFC\/1500EFC \/1650EFC"},"content":{"rendered":"\n
<\/div>\n\n\n\n

Features Introduction<\/h2>\n\n\n\n
\n\n\n\n
<\/div>\n\n\n\n
\n
\n
\"\"<\/figure>\n\n\n\n

Lead edge feeder<\/strong><\/h4>\n\n\n\n
<\/div>\n\n\n\n

Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board. <\/p>\n\n\n\n

Fine vacuum suction adjustment through inverter adapts to wide range stock from f flute to double wall corrugate.<\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/figure>\n\n\n\n

Sheet transmission and alignment section<\/strong><\/h4>\n\n\n\n
<\/div>\n\n\n\n

Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.<\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/figure>\n\n\n\n

Timing belt driven device<\/strong><\/strong><\/strong><\/strong><\/h4>\n\n\n\n
<\/div>\n\n\n\n

Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.<\/p>\n\n\n\n

\u25cf MHC1300\/1500 series adopt timing belt driven system<\/p>\n\n\n\n

\u25cf MHC1650 series adopt chain driven system<\/p>\n<\/div>\n<\/div>\n\n\n\n

\n
\n
\"\"<\/figure>\n\n\n\n

Stripping unit<\/strong><\/strong><\/strong><\/h4>\n\n\n\n
<\/div>\n\n\n\n

Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.<\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/figure>\n\n\n\n

Auto Non-stop Collecting Device<\/strong><\/strong><\/h4>\n\n\n\n
<\/div>\n\n\n\n

\u25cf 1100 series equipped with manual non-stop collecting device<\/p>\n\n\n\n

\u25cf 1300\/1500\/1650\/1900 series equipped with auto non-stop collecting device<\/p>\n<\/div>\n\n\n\n

\n
\"\"<\/figure>\n\n\n\n

Auto lubrication system<\/strong><\/strong><\/h4>\n\n\n\n
<\/div>\n\n\n\n

Adopt concentrated auto lubrication system to make sure the driven parts working better.<\/p>\n<\/div>\n<\/div>\n\n\n\n

<\/div>\n\n\n\n

Configurations<\/h2>\n\n\n\n
\n\n\n\n
Feeding Unit<\/strong><\/strong><\/span><\/strong><\/td>MHC-1300EF<\/strong>C\/1500EFC<\/strong>\/1650EFC<\/strong><\/span><\/strong><\/td><\/tr>
01. High precision bottom suction cup paper feeding feida, feida at the bottom of the non-stop suction nozzle, vacuum adsorption way to send cardboard into the paper pressing roller, not easy to scratch the printing surface<\/td>\u3007<\/td><\/tr>
02. Pneumatic side push baffle (right side)<\/td>\u3007<\/td><\/tr>
03. Electrically controlled paper feed roller<\/td>\u3007<\/td><\/tr>
04. Press paper and front gauge, double sheet detection device accurate response<\/td>\u3007<\/td><\/tr>
05. Front hook adjustment device, cardboard bending up and down can be adjusted<\/td>\u3007<\/td><\/tr>
06. Non-stop adjusting device for feeding step<\/td>\u3007<\/td><\/tr>
07. Front and back position adjustment device, can be adjusted according to the size of the bite<\/td>\u3007<\/td><\/tr>
08. Right and left side positioning push gauge to ensure accurate positioning of cardboard side<\/td>\u3007<\/td><\/tr>
Die-cutting Unit<\/strong><\/strong><\/span><\/strong><\/td><\/td><\/tr>
01. The main body of ductile iron, upper platform and lower moving platform<\/td>\u3007<\/td><\/tr>
02. Imported worm gear, worm with 40CR crankshaft<\/td>\u3007<\/td><\/tr>
03. Rotary device for die cutting bottom plate and cutter template<\/td>\u3007<\/td><\/tr>
04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys<\/td>\u3007<\/td><\/tr>
05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure<\/td>\u3007<\/td><\/tr>
06. Import main drive chain<\/td>\u3007<\/td><\/tr>
07. Imported intermittent divider<\/td>\u3007<\/td><\/tr>
08. Main drive inlet pneumatic clutch brake device<\/td>\u3007<\/td><\/tr>
09. Japanese SMC pressure detection device, pressure is too low alarm<\/td>\u3007<\/td><\/tr>
10. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate<\/td>\u3007<\/td><\/tr>
11. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation<\/td>\u3007<\/td><\/tr>
12. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil<\/td>\u3007<\/td><\/tr>
Stripping Unit<\/strong><\/strong><\/span><\/strong><\/td><\/td><\/tr>
01. Adopt upper and lower double frame waste cleaning mechanism<\/td>\u3007<\/td><\/tr>
02. Adopt male and female models to achieve all kinds of waste<\/td>\u3007<\/td><\/tr>
03. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board<\/td>\u3007<\/td><\/tr>
Delivery Unit<\/strong><\/strong><\/span><\/strong><\/td><\/td><\/tr>
01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack<\/td>\u3007<\/td><\/tr>
02. Paper collecting and paper leveling device<\/td>\u3007<\/td><\/tr>
03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up<\/td>\u3007<\/td><\/tr>
04. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate<\/td>\u3007<\/td><\/tr>
05. Non-stop rolling shutter paper collecting device<\/td>\u3007<\/td><\/tr>
Electrical Parts<\/strong><\/strong><\/span><\/strong><\/td><\/td><\/tr>
01. Huichuan PLC control system<\/td>\u3007<\/td><\/tr>
02. The die – cutting part adopts 10.4 – inch touch screen<\/td>\u3007<\/td><\/tr>
03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts<\/td>\u3007<\/td><\/tr>
04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action<\/td>\u3007<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: \u3007; Optional: \u25b3<\/p>\n\n\n\n

<\/div>\n\n\n\n

Main Technical Parameter<\/h2>\n\n\n\n
\n\n\n\n
Model<\/strong><\/strong><\/strong><\/td>MHC-1300EFC<\/strong><\/td>MHC-1500EFC<\/strong><\/td>MHC-1650EFC<\/strong><\/td><\/tr>
Max. Sheet Size<\/td>1290\u00d7940mm<\/td>1500\u00d71100mm<\/td>1650\u00d71200mm<\/td><\/tr>
Min. Sheet Size<\/td>470\u00d7470mm<\/td>470\u00d7470mm<\/td>650\u00d7500mm<\/td><\/tr>
Max. Die Cutting Size<\/td>1280\u00d7920mm<\/td>1480\u00d71080mm<\/td>1620\u00d71180mm<\/td><\/tr>
Max. Working Speed<\/td>5000s\/h<\/td>5000s\/h<\/td>4000s\/h<\/td><\/tr>
Min. Gripper Waste<\/td>12mm<\/td>12mm<\/td>12mm<\/td><\/tr>
Min. Gripper Margin<\/td>6-12mm<\/td>6-12mm<\/td>6-12mm<\/td><\/tr>
Cutting Rule Height<\/td>23.8mm<\/td>23.8mm<\/td>23.8mm<\/td><\/tr>
Electrical Power<\/td>380V, 50HZ, 3PH<\/td>380V, 50HZ, 3PH<\/td>380V, 50HZ, 3PH<\/td><\/tr>
Air Pump Displacement<\/td>Air compressor displacement 1.05m3<\/sup>\/min\uff0c
12kg\/cm2<\/sup>\u2013 ( prepared by user)<\/td>		Air compressor displacement 1.05m3<\/sup>\/min\uff0c
12kg\/cm2<\/sup>\u2013 ( prepared by user)<\/td>		Air compressor displacement 1.05m3<\/sup>\/min\uff0c
12kg\/cm2<\/sup>\u2013 ( prepared by user)<\/td><\/tr>
Min. Motor Power<\/td>11kw<\/td>15kw<\/td>15kw<\/td><\/tr>
Max. Working Pressure<\/td>300T<\/td>300T<\/td>300T<\/td><\/tr>
Machine Weight<\/td>19T<\/td>21T<\/td>23T<\/td><\/tr>
Machine Dimension<\/td>8760\u00d74510\u00d72300mm<\/td>9140\u00d74710\u00d72300mm<\/td>9580\u00d75140\u00d72500mm<\/td><\/tr>
Stock Range<\/td>\u22648.5mm corrugated paper,
E, B, C, A and AB corrugated paper<\/td>		\u22648.5mm corrugated paper,
E, B, C, A and AB corrugated paper<\/td>		\u22648.5mm corrugated paper,
E, B, C, A and AB corrugated paper<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
<\/div>\n\n\n\n

Drawing<\/h2>\n\n\n\n
\n\n\n\n
\"\"<\/figure>\n\n\n\n
<\/div>\n","protected":false},"excerpt":{"rendered":"

Features Introduction Lead edge feeder Top gear and pre […]<\/p>\n","protected":false},"author":1,"featured_media":7825,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[4,10],"tags":[],"_links":{"self":[{"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/posts\/1301"}],"collection":[{"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1301"}],"version-history":[{"count":16,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/posts\/1301\/revisions"}],"predecessor-version":[{"id":7313,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/posts\/1301\/revisions\/7313"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=\/wp\/v2\/media\/7825"}],"wp:attachment":[{"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1301"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1301"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.dayuanmachinery.com\/en\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1301"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}