PRODUCT
PRODUCT
MHC 1100F/1300F/1500F/1650F/1900F
Automatic Die Cutting & Creasing Machine (Lead Edge Feeder)
Features Introduction
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from f flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650/1900 series adopt chain driven system
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1100F/1300F/1500F/1650F/1900F |
| 01. High speed precision frontier paper feeding device, high precision paper feeding, strong suction, not easy to slip, can stably transport various types of corrugated paper | 〇 |
| 02. The special polyethylene ester paper feeding rubber wheel is combined with the palisade paper holder and air cushion to ensure the smooth and accurate transportation of heavy and warped paperboard | 〇 |
| 03. Variable frequency suction air volume fine-tuning device, to adapt to the different thickness from F to five corrugated paper feeding requirements | 〇 |
| 04. Pneumatic side push baffle (left and right sides) | 〇 |
| 05. The left and right baffle can be adjusted independently or synchronously. The slanting front baffle can be fine-adjusted before and after, up and down to reduce the pressure of the paper under the paper pile, and feed the paper more smoothly | 〇 |
| 06. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| 07. Upper and lower height adjustment device, according to paper and thickness adjustment, paper feeding more smooth and stable | 〇 |
| 08. Front and back position adjustment device, can be adjusted according to bite size | 〇 |
| 09. Non-stop adjusting device for feeding step | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100F) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300F/1500F/1650F/1900F) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100F) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100F) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300F/1500F/1650F/1900F) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100F) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| 06. Non-stop rolling shutter paper collecting device (MHC-1300F/1500F/1650F/1900F) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100F | MHC-1300F | MHC-1500F | MHC-1650F | MHC-1900F |
| Max. Sheet Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm | 1900×1400mm |
| Min. Sheet Size | 470×450mm | 470×470mm | 470×470mm | 650×500mm | 650×550mm |
| Max. Die Cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm | 1870×1380mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h | 3500s/h |
| Min. Gripper Waste | 12mm | 12mm | 12mm | 12mm | 12mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm | 23.8mm | 23.8mm |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Air Pump Displacement | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) |
| Min. Motor Power | 11kw | 11kw | 15kw | 15kw | 18.5kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T | 300T |
| Machine Weight | 16T | 18T | 20T | 22T | 30T |
| Machine Dimension | 7000×4250×2350mm | 7400×4510×2300mm | 8100×4710×2300mm | 8230×5140×2500mm | 8700×5880×2530mm |
| Stock Range | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
