Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
8 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Variable speed worm gear drive device
Worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Advanced tooling lockup
Advanced quick tooling set up system ensures fast job change over and hence high productivity at both stripping and blanking stations.
Full sheet delivery
Full sheet delivery option to ensure easy production planning by selecting final delivery style.
Auto separation sheet insert
Automatic separating sheet inserter oupled with electronic position sensor at blanking station.
Non-stop sampling
The Sampling Function can be used to remove a sample sheet on the fly by one button only, easy for operating.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060SCE |
| 01. Non-stop high-speed paper feeding department | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No proof, test pressure and so on can be arbitrarily separated and closed on the conveying part | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Variable speed worm gear transmission mechanism, short die cutting stroke, large moving Angle, is conducive to multi-plate small connecting point high-speed operation, high production efficiency, not easy to loose version | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 06. Imported torque limit overload protector | 〇 |
| 07. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 08. The whole set of imported anodized aluminum alloy tooth row and positioning structure of 8 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 09. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 10. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 11. High precision imported paper teeth row transmission chain | 〇 |
| 12. Import main drive chain | 〇 |
| 13. Imported intermittent divider | 〇 |
| 14. Imported synchronous belt, belt wheel drive | 〇 |
| 15. Main drive inlet pneumatic clutch brake device | 〇 |
| 16. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 17. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 18. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 19. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 20. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 21. Siemens brand main motor drive | 〇 |
| 22. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 23. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Waste cleaning upper frame adopts pneumatic fast lock device | 〇 |
| 04. Pull-out drive mechanism with quick locking function for middle waste – removing Yin die | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 06. Center positioning method is adopted for the lower frame of waste cleaning | 〇 |
| 07. Clean the waste transmission mechanism | 〇 |
| 08. Funnel type waste collection device | 〇 |
| 09. High efficiency and smooth CAM movement curve drives large moving Angle waste removal and full waste removal tools to ensure waste removal (even small waste) at high speed | 〇 |
| 10. Waste cleaning frame with digital display trimmer | 〇 |
| 11. Waste tooth removal and placement device | 〇 |
| Different Product | |
| 01. Quick lock system for parting tool | 〇 |
| 02. Trimmer with digital display | 〇 |
| 03. Product tool center positioning system | 〇 |
| 04. Pneumatic lifting device for upper frame of product | 〇 |
| 05. Pull-out full clean waste products on the frame, fast version change, easy to operate | 〇 |
| 06. Automatic paper laying counting device | 〇 |
| 07. Automatic non-stop paper receiving device | 〇 |
| 08. Automatic discharging device can meet the European standard 1200*800mm tray | 〇 |
| 09. Insert sucker device, automatic selection according to paper size | 〇 |
| 10. Constant leveling system (NTC), the top of finished products may warpage unevenness after stacking, can adjust the top surface height of finished products to increase or reduce the pressure | 〇 |
| 11. Automatic transfer device for stacking paper pallet | 〇 |
| Waste Edge Output Department | |
| 01. Waste edge conveyor | 〇 |
| 02. Non-stop sampling device | 〇 |
| 03. Servo driven damping brush | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04、The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060SCE |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Minimum Gripper Margin | 9~17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.075mm |
| Max.die Cutting Force | 300T |
| Max.working Speed | 8000s/h |
| Maximum Pile Height at Feeder-Normal Mode | 1800mm |
| Maximum Pile Height at Feeder-Non-stop Mode | 1520mm |
| Maximum Pile Height at Delivery | 1580mm |
| Machine Dimensions | 10298×5857×2657mm (L×W×H)（L: paper prepared track included, W: platform included） |
| Net Weight of Machine | 22000kg |
| Main Motor Power | 15KW |
| Total Power Required | 26KW |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
Gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Advanced tooling lockup
Advanced quick tooling set up system ensures fast job change over and hence high productivity at both stripping and blanking stations.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-2S1060RMC |
| 01. Non-stop high-speed paper feeding department | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No proof, test pressure and so on can be arbitrarily separated and closed on the conveying part | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 07. The whole set of imported anodized aluminum alloy tooth row and positioning structure of 8 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 08. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 09. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 10. High precision imported paper teeth row transmission chain | 〇 |
| 11. Import main drive chain | 〇 |
| 12. Imported intermittent divider | 〇 |
| 13. Imported synchronous belt, belt wheel drive | 〇 |
| 14. Main drive inlet pneumatic clutch brake device | 〇 |
| 15. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 16. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 17. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 18. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 19. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 20. Siemens brand main motor drive | 〇 |
| 21. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 22. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Waste cleaning upper frame adopts pneumatic fast lock device | 〇 |
| 04. Pull-out drive mechanism with quick locking function for middle waste – removing Yin die | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 06. Center positioning method is adopted for the lower frame of waste cleaning | 〇 |
| 07. Clean the waste transmission mechanism | 〇 |
| 08. Funnel type waste collection device | 〇 |
| 09. Waste cleaning frame with digital display trimmer | 〇 |
| 10. Waste tooth removal and placement device | 〇 |
| Waste Edge Output Department | |
| 01. Waste edge conveyor | 〇 |
| 02. Non-stop sampling device | 〇 |
| 03. Servo driven damping brush | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04、The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-2S1060RMC |
| Function | deep embossing+die cutting+stripping |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Inner Chase Size | 1080×770mm |
| Maximum Cutting Size | 1060×745mm |
| Maximum Stamping Size | 1060×740mm |
| Minimum Gripper Margin | 9~17mm |
| Minimum Width of Double Cuts | 5mm |
| Die Cutting Accuracy | ≤±0.075mm |
Max.die Cutting Force | 600ton + 300ton |
| Max.working Speed | 7200s/h |
| Maximum Pile Height at Feeder-Normal Mode | 1800mm |
| Maximum Pile Height at Feeder-Non-stop Mode | 1520mm |
| Maximum Pile Height at Delivery | 1580mm |
| Electric-heated System | 20 Heating zones, 40~180℃ Adjustable |
| Press1 Foil Advance Shafts | Electric-heated system |
| Press2 Foil Advance Shafts | die cutting+stripping |
| Machine Dimensions (L×W×H) | 9683×4708×2716mm |
| Machine Dimensions (Including Die Preloader) (L×W×H) | 9683×5608×2716mm |
| Net Weight of Machine | 44000kg |
| Full Load Wattage | 48KW |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥1m3/min |
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
7 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Advanced tooling lockup
Advanced quick tooling set up system ensures fast job change over and hence high productivity at both stripping stations.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Gripper edge waste removal device
Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side.
Auto non-stop collecting device
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060ACE |
| 01. Non-stop high-speed paper feeding section | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 07. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 08. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 09. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 10. High precision imported paper teeth row transmission chain | 〇 |
| 11. Import main drive chain | 〇 |
| 12. Imported intermittent divider | 〇 |
| 13. Imported synchronous belt, belt wheel drive | 〇 |
| 14. Main drive inlet pneumatic clutch brake device | 〇 |
| 15. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 16. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 17. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 18. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 19. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 20. Siemens brand main motor drive | 〇 |
| 21. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 22. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit (Clean up all sides) | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Waste cleaning upper frame adopts pneumatic fast lock device | 〇 |
| 04. Pull-out drive mechanism with quick locking function for middle waste – removing Yin die | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 06. Center positioning method is adopted for the lower frame of waste cleaning | 〇 |
| 07. Clean the waste transmission mechanism | 〇 |
| 08. Funnel type waste collection device | 〇 |
| 09. High efficiency and smooth CAM movement curve drives large moving Angle waste removal and full waste removal tools to ensure waste removal (even small waste) at high speed | 〇 |
| 10. Waste cleaning frame with digital display trimmer | 〇 |
| 11. Waste tooth removal and placement device | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Rolling curtain type auxiliary paper collecting frame, can realize non-stop machine paper collecting | 〇 |
| 05. The paper receiving part can be controlled by 7 inch touch screen | 〇 |
| 06. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060ACE |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Gripper Margin | 9-17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Precision | ≤±0.075mm |
| Maximum Cutting Pressure | 600T |
| Maximum Working Speed | 8000s/h |
| Maximum Pile Height at Feeder | 1630mm (With wooden pallet) |
| Maximum Pile Height at Delivery | 1480mm (With wooden pallet) |
| Machine Dimensions (L×W×H) | 8017×4518×2502mm (L:paper prepared track included, W:platform included) |
| Net Weight of Machine | 22T |
| Main Motor Power | 15KW |
| Total Power Required | 23KW |
| Air Requirement | Air pressure: 0.6~0.7Mpa, Flow rate: ≥0.37m3/min |
Process Flow
Drawing
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
7 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Advanced tooling lockup
Advanced quick tooling set up system ensures fast job change over and hence high productivity at both stripping stations.
Gripper edge waste removal device
Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side.
Auto non-stop collecting device
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060ACER |
| 01. Non-stop high-speed paper feeding section | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 07. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 08. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 09. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 10. High precision imported paper teeth row transmission chain | 〇 |
| 11. Import main drive chain | 〇 |
| 12. Imported intermittent divider | 〇 |
| 13. Imported synchronous belt, belt wheel drive | 〇 |
| 14. Main drive inlet pneumatic clutch brake device | 〇 |
| 15. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 16. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 17. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 18. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 19. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 20. Siemens brand main motor drive | 〇 |
| 21. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 22. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit (Clean up all sides) | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Waste cleaning upper frame adopts pneumatic fast lock device | 〇 |
| 04. Pull-out drive mechanism with quick locking function for middle waste – removing Yin die | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 06. Center positioning method is adopted for the lower frame of waste cleaning | 〇 |
| 07. Clean the waste transmission mechanism | 〇 |
| 08. Funnel type waste collection device | 〇 |
| 09. High efficiency and smooth CAM movement curve drives large moving Angle waste removal and full waste removal tools to ensure waste removal (even small waste) at high speed | 〇 |
| 10. Waste cleaning frame with digital display trimmer | 〇 |
| 11. Waste tooth removal and placement device | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Rolling curtain type auxiliary paper collecting frame, can realize non-stop machine paper collecting | 〇 |
| 05. The paper receiving part can be controlled by 7 inch touch screen | 〇 |
| 06. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
| Hot Pressure Control System | |
| 01. Temperature zone independent control system, effectively control the heating temperature of the heating plate. Ensure the whole heating system temperature control more balanced and stable | 〇 |
| 02. The hot pressing part adopts 7 inch temperature control touch screen, easy to operate | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060ACER |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Gripper Margin | 9-17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Precision | ≤±0.075mm |
| Maximum Cutting Pressure | 600T |
| Maximum Working Speed | 8000s/h |
| Maximum Pile Height at Feeder | 1630mm (With wooden pallet) |
| Maximum Pile Height at Delivery | 1480mm (With wooden pallet) |
| Electric-heated system | 20 Heating zones, 40-180℃ Adjustable |
| Machine Dimensions (L×W×H) | 8017×4518×2502mm (L:paper prepared track included, W:platform included) |
| Net Weight of Machine | 22T |
| Main Motor Power | 15KW |
| Total Power Required | 23KW |
| Air Requirement | Air pressure: 0.6~0.7Mpa, Flow rate: ≥0.37m3/min |
Process Flow
Drawing
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
7 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Auto non-stop collecting device
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060A |
| 01. Non-stop high-speed paper feeding section | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 07. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 08. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 09. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 10. High precision imported paper teeth row transmission chain | 〇 |
| 11. Import main drive chain | 〇 |
| 12. Imported intermittent divider | 〇 |
| 13. Imported synchronous belt, belt wheel drive | 〇 |
| 14. Main drive inlet pneumatic clutch brake device | 〇 |
| 15. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 16. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 17. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 18. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 19. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 20. Siemens brand main motor drive | 〇 |
| 21. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 22. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Rolling curtain type auxiliary paper collecting frame, can realize non-stop machine paper collecting | 〇 |
| 05. The paper receiving part can be controlled by 7 inch touch screen | 〇 |
| 06. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060A |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Gripper Margin | 9-17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Precision | ≤±0.075mm |
| Maximum Cutting Pressure | 600T |
| Maximum Working Speed | 8000s/h |
| Maximum Pile Height at Feeder | 1630mm (With wooden pallet) |
| Maximum Pile Height at Delivery | 1480mm (With wooden pallet) |
| Machine Dimensions (L×W×H) | 6703×4518×2502mm (L:paper prepared track included, W:platform included) |
| Net Weight of Machine | 20T |
| Main Motor Power | 15KW |
| Total Power Required | 23KW |
| Air Requirement | Air pressure: 0.6~0.7Mpa, Flow rate: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
7 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Auto non-stop collecting device
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060AR |
| 01. Non-stop high-speed paper feeding section | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 07. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 08. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 09. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 10. High precision imported paper teeth row transmission chain | 〇 |
| 11. Import main drive chain | 〇 |
| 12. Imported intermittent divider | 〇 |
| 13. Imported synchronous belt, belt wheel drive | 〇 |
| 14. Main drive inlet pneumatic clutch brake device | 〇 |
| 15. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 16. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 17. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 18. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 19. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 20. Siemens brand main motor drive | 〇 |
| 21. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 22. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit (Clean up all sides) | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Waste cleaning upper frame adopts pneumatic fast lock device | 〇 |
| 04. Pull-out drive mechanism with quick locking function for middle waste – removing Yin die | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 06. Center positioning method is adopted for the lower frame of waste cleaning | 〇 |
| 07. Clean the waste transmission mechanism | 〇 |
| 08. Funnel type waste collection device | 〇 |
| 09. High efficiency and smooth CAM movement curve drives large moving Angle waste removal and full waste removal tools to ensure waste removal (even small waste) at high speed | 〇 |
| 10. Waste cleaning frame with digital display trimmer | 〇 |
| 11. Waste tooth removal and placement device | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Rolling curtain type auxiliary paper collecting frame, can realize non-stop machine paper collecting | 〇 |
| 05. The paper receiving part can be controlled by 7 inch touch screen | 〇 |
| 06. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
| Hot Pressure Control System | |
| 01. Temperature zone independent control system, effectively control the heating temperature of the heating plate. Ensure the whole heating system temperature control more balanced and stable | 〇 |
| 02. The hot pressing part adopts 7 inch temperature control touch screen, easy to operate | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060AR |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Gripper Margin | 9-17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Precision | ≤±0.075mm |
| Maximum Cutting Pressure | 600T |
| Maximum Working Speed | 8000s/h |
| Maximum Pile Height at Feeder | 1630mm (With wooden pallet) |
| Maximum Pile Height at Delivery | 1480mm (With wooden pallet) |
| Electric-heated system | 20 Heating zones, 40-180℃ Adjustable |
| Machine Dimensions (L×W×H) | 6703×4518×2502mm (L:paper prepared track included, W:platform included) |
| Net Weight of Machine | 21T |
| Main Motor Power | 15KW |
| Total Power Required | 35KW |
| Air Requirement | Air pressure: 0.6~0.7Mpa, Flow rate: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
7 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Variable speed worm gear drive device
Worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Auto non-stop collecting device
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060 |
| 01. Non-stop high-speed paper feeding section | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Variable speed worm gear transmission mechanism, short die cutting stroke, large moving Angle, is conducive to multi-plate small connecting point high-speed operation, high production efficiency, not easy to loose version | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 06. Imported torque limit overload protector | 〇 |
| 07. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 08. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 09. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 10. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 11. High precision imported paper teeth row transmission chain | 〇 |
| 12. Import main drive chain | 〇 |
| 13. Imported intermittent divider | 〇 |
| 14. Imported synchronous belt, belt wheel drive | 〇 |
| 15. Main drive inlet pneumatic clutch brake device | 〇 |
| 16. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 17. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 18. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 19. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 20. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 21. Siemens brand main motor drive | 〇 |
| 22. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 23. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Rolling curtain type auxiliary paper collecting frame, can realize non-stop machine paper collecting | 〇 |
| 05. The paper receiving part can be controlled by 7 inch touch screen | 〇 |
| 06. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060 |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Minimum Gripper Margin | 9~17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.075mm |
| Max.die Cutting Force | 300T |
| Max.working Speed | 9000s/h |
| Max. feeder pile height | 1630mm(With wooden pallet) |
| Max. delivery pile height | 1480mm(With wooden pallet) |
| Machine Dimensions | 6703×4518×2302mm (L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 17000kg |
| Main Motor Power | 15KW |
| Total Power Required | 23KW |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder
Feeder based on advanced technical platform feeding precisely and consistently of wide range stock from 90g/m2 thin paper to 1000g/m2 cardboard as well as micro flute corrugated board.
Double sheet detector
Ultrasonic double sheet detector without touching the paper, hence scratch free, reliable and quick set up.
Gripper bar
7 gripper bars made of cutting edge latest technology running extremely smoothly, thanks to the unique design of large motion angle eccentric worm gear drive system.
Variable speed worm gear drive device
Worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed.
Plate setting
5mm hardened cutting plate or 4+1mm sandwich plate on top 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and easy make ready.
Mould quick locking device
Adopt center-line system and quick locking device to save make ready time.
Advanced tooling lockup
Advanced quick tooling set up system ensures fast job change over and hence high productivity at both stripping stations.
Gripper edge waste removal device
Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side.
Auto non-stop collecting device
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Germany vaccum pump
Germany Becker oil free blower and vacuum pump.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | BHT-1060CE |
| 01. Non-stop high-speed paper feeding section | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, and feida does not stop operation | 〇 |
| 07. Main feed pile mechanical left and right trimming device | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Paper position adjustment device can manually adjust the distance of paper to the front gauge without stopping | 〇 |
| 10. Large bevel feeding table, suitable for high-speed transmission of thin paper and bent paper | 〇 |
| 11. The four front gauges can be adjusted individually | 〇 |
| 12. Paper pressing device, more smoothly to bend paper to the front gauge | 〇 |
| 13. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 14. Side gauge, front gauge paper photoelectric detection | 〇 |
| 15. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 16. Ultrasonic duplex detector | 〇 |
| 17. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 18. Pneumatic lifting device for feeding frame | 〇 |
| 19. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 20. PLC and electronic CAM control the timing of the whole machine | 〇 |
| 21. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 22. Paper is not in position to force paper clamping and tooth opening device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Variable speed worm gear transmission mechanism, short die cutting stroke, large moving Angle, is conducive to multi-plate small connecting point high-speed operation, high production efficiency, not easy to loose version | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 06. Imported torque limit overload protector | 〇 |
| 07. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 08. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each of 9 fine steel paper teeth and supporting pillow, the tooth row adopts adjustable tooth row structure | 〇 |
| 09. Servo control system is adopted for the rear positioning of tooth row, and the accuracy of each tooth row can be adjusted by PLC touch screen button to ensure the accuracy of tooth row, permanent accuracy of ±0.075mm (patented product) | 〇 |
| 10. Screw drive chain is equipped with independent lubricating oil device | 〇 |
| 11. High precision imported paper teeth row transmission chain | 〇 |
| 12. Import main drive chain | 〇 |
| 13. Imported intermittent divider | 〇 |
| 14. Imported synchronous belt, belt wheel drive | 〇 |
| 15. Main drive inlet pneumatic clutch brake device | 〇 |
| 16. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 17. The die cutting pressure is directly and accurately measured by the deformation measuring device and displayed on the man-machine interface | 〇 |
| 18. 15mm die cutting steel plate plate is equipped with 5mm combined lower plate center positioning structure +/-0.9mm vertical and horizontal fine adjustment device, plate change fast, simple, reduce plate repair operation time | 〇 |
| 19. Die-cut plate frame adopts center line fast positioning device structure, with fine tuning function, convenient plate frame adjustment | 〇 |
| 20. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 21. Siemens brand main motor drive | 〇 |
| 22. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 23. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit (Clean up all sides) | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Waste cleaning upper frame adopts pneumatic fast lock device | 〇 |
| 04. Pull-out drive mechanism with quick locking function for middle waste – removing Yin die | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 06. Center positioning method is adopted for the lower frame of waste cleaning | 〇 |
| 07. Clean the waste transmission mechanism | 〇 |
| 08. Funnel type waste collection device | 〇 |
| 09. High efficiency and smooth CAM movement curve drives large moving Angle waste removal and full waste removal tools to ensure waste removal (even small waste) at high speed | 〇 |
| 10. Waste cleaning frame with digital display trimmer | 〇 |
| 11. Waste tooth removal and placement device | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Rolling curtain type auxiliary paper collecting frame, can realize non-stop machine paper collecting | 〇 |
| 05. The paper receiving part can be controlled by 7 inch touch screen | 〇 |
| 06. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die cutting part adopts German Siemens 10.4 inches and the paper receiving part 7 inches touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1060CE |
| Maximum Sheet Size | 1060×760mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1060×745mm |
| Minimum Width of Double Cuts | 5mm |
| Minimum Gripper Margin | 9~17mm |
| Cutting Rule Height | 23.8mm |
| Inner Chase Size | 1080×770mm |
| Stock Range | Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.075mm |
| Max.die Cutting Force | 300T |
| Max.working Speed | 9000s/h |
| Max. feeder pile height | 1630mm(With wooden pallet) |
| Max. delivery pile height | 1480mm(With wooden pallet) |
| Machine Dimensions | 8017×4518×2502mm (L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 18000kg |
| Main Motor Power | 15KW |
| Total Power Required | 23KW |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Process Flow
Drawing
Features Introduced
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from F flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Variable speed worm gear drive device
Worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed.
Three layer stripping section
Stationary middle stripping board, coupled with zero jerk, smooth upper frame motion curve with extra punch at the moment of impact to obtain cleaner waste removal.
Gripper bar register block at outlets of Stripping Station ensures the accuracy of stripping.
Center line system for quick stripping tool set up and change over, compatible with centerline.
Front edge waste removal system removes and transfers waste edge outside the machine via conveyor belt.
Paper counting & collecting section (Optional)
Escalator delivery fork cooperate with non-stop air cylinder for neat and positive conveying to belt table. Bundle Delivery table is ready for further connection with Breaker for inline operation (to be required at order).
Electrical batch counter as standard.
Spring loaded adjustable chain tensioner for maintaining constant tension thus reducing stress on chains and producing smooth gripper bar movement.
Auto non-stop collecting device (Optional)
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Configurations
| Feeding Unit | MHK-1650FC/1900FC/2100FC |
| 01. High precision bottom suction cup paper feeding feida, feida at the bottom of the non-stop suction nozzle, vacuum adsorption way to send cardboard into the paper pressing roller, not easy to scratch the printing surface | 〇 |
| 02. Pneumatic side push baffle (right side) | 〇 |
| 03. Electrically controlled paper feed roller | 〇 |
| 04. Press paper and front gauge, double sheet detection device accurate response | 〇 |
| 05. Front hook adjustment device, cardboard bending up and down can be adjusted | 〇 |
| 06. Non-stop adjusting device for feeding step | 〇 |
| 07. Front and back position adjustment device, can be adjusted according to the size of the bite | 〇 |
| 08. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 09. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| Die-cutting Unit | |
| 01. Ductile iron heavy main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Gear transmission, accuracy | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. Siemens brand main motor drive | 〇 |
| 14. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 15. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| 16. Handle wheel – block pressure trimmer with gravity position indicator | 〇 |
| 17. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate | 〇 |
| Stripping Unit (Clean up all sides) | |
| 01. Adopt upper and lower double frame waste cleaning mechanism | 〇 |
| 02. Adopt male and female models to achieve all kinds of waste | 〇 |
| 03. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 04. Mouth waste cleaning device | 〇 |
| Delivery Unit | |
| 01. The paper board surface is not easy to scratch and friction in the process of paper collecting by using the lifting platform of plug rod bracket and belt conveyor (special and optional for counting and stacking paper collecting) | △ |
| 02. Non-stop cylinder automatic paper receiving rack and automatic lifting bracket paper receiving table can be used alternately, counting and stacking, and conveying to the outside of the machine with belt (special for counting and stacking paper receiving, optional) | △ |
| 03. Electronic counter | 〇 |
| 04. Spring chain adjusting device, adjust the spring chain tightening after the buffer from the driven wheel greatly reduce the impact of the inertia of the tooth row steering, and can maintain the balance of the chain tightening | 〇 |
| 05. Non-stop rolling shutter paper collecting device (special and optional for high pile paper collecting) | △ |
| 06. High stack paper receiving platform lifting device, paper receiving structure can be outside the whole stack paper pulling machine (special for high stack paper receiving, optional) | △ |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die – cutting part adopts Siemens 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1650FC | BHT-1900FC | BHT-2100FC |
| Max. Sheet Size | 1650×1200mm | 1900×1400mm | 2100×1600mm |
| Min. Sheet Size | 650×500mm | 650×500mm | 750×650mm |
| Max. Die Cutting Size | 1630×1180mm | 1880×1380mm | 2080×1580mm |
| Minimum Width of Double Cuts | 10-18mm | 10-18mm | 10-18mm |
| Gripper Margin | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm |
| Inner Chase Size | 1670×1230mm | 1920×1430mm | 2120×1630mm |
| Stock Range | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper |
| Max. Die Cutting Speed | 6000s/h | 5000s/h | 4000s/h |
| Max. Die Cutting Force | 400T | 450T | 450T |
| Mobile Lower Platen Adjusting Range | ±1.5mm | ±1.5mm | ±1.5mm |
| Max. Delivery Pile Height | 1500mm (With wooden pallet) | 1500mm (With wooden pallet) | 1500mm (With wooden pallet) |
| Overall Dimension (L×W×H) | 10187×5254×2776mm (W:platform included) | 11488×6360×2902mm (W: platform included) | 12480×6360×2970mm (W: platform included) |
| Max. Delivery Pile Height | 計疊式收紙(選配) | 計疊式收紙(選配) | 計疊式收紙(選配) |
| Overall Dimension (L×W×H) | 11638×5254×2776mm (W:platform included) | 13377×6360×2902mm (W:platform included) | 14370×6360×2970mm (W:platform included) |
| Net Weight Approx | 40T | 46T | 51T |
| Main Motor Wattage | 18.5kw | 18.5kw | 22kw |
| Full Load Wattage | 38kw | 40kw | 47kw |
| Air Requirement | Air pressure: 0.6~0.7Mpa, Flow rate: ≥1m3/min | Air pressure: 0.6~0.7Mpa, Flow rate: ≥1m3/min | Air pressure: 0.6~0.7Mpa, Flow rate: ≥1m3/min |
Drawing
Features Introduced
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from F flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Variable speed worm gear drive device
Worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed.
Three layer stripping section
Stationary middle stripping board, coupled with zero jerk, smooth upper frame motion curve with extra punch at the moment of impact to obtain cleaner waste removal.
Gripper bar register block at outlets of Stripping Station ensures the accuracy of stripping.
Center line system for quick stripping tool set up and change over, compatible with centerline.
Front edge waste removal system removes and transfers waste edge outside the machine via conveyor belt.
Paper counting & collecting section (Optional)
Escalator delivery fork cooperate with non-stop air cylinder for neat and positive conveying to belt table. Bundle Delivery table is ready for further connection with Breaker for inline operation (to be required at order).
Electrical batch counter as standard.
Spring loaded adjustable chain tensioner for maintaining constant tension thus reducing stress on chains and producing smooth gripper bar movement.
Auto non-stop collecting device (Optional)
Main collecting device and Auto non-stop collecting device switch automatically without any operation, which make the machine more efficient.
Configurations
| Feeding Unit | BHT 1650EFC/1900EFC/2100EFC |
| 01. High precision bottom suction cup paper feeding feida, feida at the bottom of the non-stop suction nozzle, vacuum adsorption way to send cardboard into the paper pressing roller, not easy to scratch the printing surface | 〇 |
| 02. Pneumatic side push baffle (right side) | 〇 |
| 03. Electrically controlled paper feed roller | 〇 |
| 04. Press paper and front gauge, double sheet detection device accurate response | 〇 |
| 05. Front hook adjustment device, cardboard bending up and down can be adjusted | 〇 |
| 06. Non-stop adjusting device for feeding step | 〇 |
| 07. Front and back position adjustment device, can be adjusted according to the size of the bite | 〇 |
| 08. Germany Baker brand blowing and suction dual vacuum pump | 〇 |
| 09. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| Die-cutting Unit | |
| 01. Ductile iron heavy main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Automatic lubricating oil cooling and lubrication system in main transmission box | 〇 |
| 05. Imported torque limit overload protector | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Gear transmission, accuracy | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. Siemens brand main motor drive | 〇 |
| 14. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 15. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| 16. Handle wheel – block pressure trimmer with gravity position indicator | 〇 |
| 17. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate | 〇 |
| Stripping Unit (Clean up all sides) | |
| 01. Adopt upper and lower double frame waste cleaning mechanism | 〇 |
| 02. Adopt male and female models to achieve all kinds of waste | 〇 |
| 03. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| 04. Mouth waste cleaning device | 〇 |
| Delivery Unit | |
| 01. The paper board surface is not easy to scratch and friction in the process of paper collecting by using the lifting platform of plug rod bracket and belt conveyor (special and optional for counting and stacking paper collecting) | △ |
| 02. Non-stop cylinder automatic paper receiving rack and automatic lifting bracket paper receiving table can be used alternately, counting and stacking, and conveying to the outside of the machine with belt (special for counting and stacking paper receiving, optional) | △ |
| 03. Electronic counter | 〇 |
| 04. Spring chain adjusting device, adjust the spring chain tightening after the buffer from the driven wheel greatly reduce the impact of the inertia of the tooth row steering, and can maintain the balance of the chain tightening | 〇 |
| 05. Non-stop rolling shutter paper collecting device (special and optional for high pile paper collecting) | △ |
| 06. High stack paper receiving platform lifting device, paper receiving structure can be outside the whole stack paper pulling machine (special for high stack paper receiving, optional) | △ |
| Electrical Parts | |
| 01. Siemens PLC control system | 〇 |
| 02. The die – cutting part adopts Siemens 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | BHT-1650EFC | BHT-1900EFC | BHT-2100EFC |
| Max. Sheet Size | 1650×1200mm | 1900×1400mm | 2100×1600mm |
| Min. Sheet Size | 650×500mm | 650×500mm | 750×650mm |
| Max. Die Cutting Size | 1630×1180mm | 1880×1380mm | 2080×1580mm |
| Minimum Width of Double Cuts | 10-18mm | 10-18mm | 10-18mm |
| Gripper Margin | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm |
| Inner Chase Size | 1670×1230mm | 1920×1430mm | 2120×1630mm |
| Stock Range | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper |
| Max. Die Cutting Speed | 6000s/h | 5000s/h | 4000s/h |
| Max. Die Cutting Force | 400T | 450T | 450T |
| Mobile Lower Platen Adjusting Range | ±1.5mm | ±1.5mm | ±1.5mm |
| Max. Delivery Pile Height | 1500mm (With wooden pallet) | 1500mm (With wooden pallet) | 1500mm (With wooden pallet) |
| Overall Dimension (L×W×H) | 10187×5254×2776mm (W:platform included) | 11363×6360×2902mm (W: platform included) | 12360×6360×2970mm (W: platform included) |
| Max. Delivery Pile Height | 計疊式收紙(選配) | 計疊式收紙(選配) | 計疊式收紙(選配) |
| Overall Dimension (L×W×H) | 11638×5254×2776mm (W:platform included) | 13252×6360×2902mm (W:platform included) | 14250×6360×2970mm (W:platform included) |
| Net Weight Approx | 41T | 47T | 52T |
| Main Motor Wattage | 18.5kw | 18.5kw | 22kw |
| Full Load Wattage | 38kw | 40kw | 47kw |
| Air Requirement | Air pressure: 0.6~0.7Mpa, Flow rate: ≥1m3/min | Air pressure: 0.6~0.7Mpa, Flow rate: ≥1m3/min | Air pressure: 0.6~0.7Mpa, Flow rate: ≥1m3/min |
Drawing
THE ADVANTAGE OF MIRROR MACHINES DUAL DIECUT TER WORKING STATION
Two flat die cutting machine operation relatively, and make sure the feeding and collecting is homodromous.
Two die-cutting machine Shared the same foot pedals, knife version, stripping, waste clearance version, and all the plate and frame, and even the same plate andframe the function of the switchboard.
Two die cutting machine per shift just one captain, reduce the manpower cost. At the same time, the layout of the two die cutting machinewas face to face, to ensure the whole assignment in a pilot’s visual monitoring range, convenient and when a pilot-in-command discoversthat the anomalies, troubleshooting, improve the yield.
The same frame switchboard and the same plate frame can be used for the matching and installation of the double-unit combined die cutting machine, and the plate frame can be interchanged and installed freely.
The central positioning system of the mobile phone is the same, all molds can be Shared.
Positive and negative (left and right) hand double unit die cutting machine, which can save the machine floor space, is conducive to the enterprise space planning, and the investment efficiency is higher.
Area Saving
| 2 Regular Machines Floor Space | Mirror Machines Floor Space | Total Space Saved | |
| With Chase Loader | 197.3m2 | 148.5m2 | 48.8m2 |
| Without Chase Loade | 172.2m2 | 142.8m2 | 27.4m2 |
Because the same foot pedal is shared, the intermediate channel (at least 2×10 meters) when the two machines are placed separately, can save 2×10=20m2 of plant occupation area.
Drawing
THE ADVANTAGE OF MIRROR MACHINES DUAL DIECUT TER WORKING STATION
Two flat die cutting machine operation relatively, and make sure the feeding and collecting is homodromous.
Two die-cutting machine Shared the same foot pedals, knife version, stripping, waste clearance version, and all the plate and frame, and even the same plate andframe the function of the switchboard.
Two die cutting machine per shift just one captain, reduce the manpower cost. At the same time, the layout of the two die cutting machinewas face to face, to ensure the whole assignment in a pilot’s visual monitoring range, convenient and when a pilot-in-command discoversthat the anomalies, troubleshooting, improve the yield.
The same frame switchboard and the same plate frame can be used for the matching and installation of the double-unit combined die cutting machine, and the plate frame can be interchanged and installed freely.
The central positioning system of the mobile phone is the same, all molds can be Shared.
Positive and negative (left and right) hand double unit die cutting machine, which can save the machine floor space, is conducive to the enterprise space planning, and the investment efficiency is higher.
Area Saving
| 2 Regular Machines Floor Space | Mirror Machines Floor Space | Total Space Saved | |
| With Chase Loader | 197.3m2 | 148.5m2 | 48.8m2 |
| Without Chase Loade | 172.2m2 | 142.8m2 | 27.4m2 |
Because the same foot pedal is shared, the intermediate channel (at least 2×10 meters) when the two machines are placed separately, can save 2×10=20m2 of plant occupation area.
Drawing
Features Introduced
Converting System Integration means devices combined in line to reduce the manual work, optimize and speed up the flow of products within a single process. Among different modes of production lines, it is the most popular and practical mode in the global market with higher stability. In this system, the automatic prefeeder is one important part linked with the feeder of automatic diecutter to raise feeding efficiency and relieve the workload of operator at maximum that manual work cannot totally reach. The automatic breaker in line with the delivery unit of diecutter automatically separates blanks from multiple ups and save considerable labor costs compared to manual work. Along with the advantages in efficiency and cost, the system is especially able to be customized at particular client demands, products techniques and processes. Nowadays this sytem has become the new tendency interested by a large number of brand owners in the corrugated board packaging industry.
Partial Introduction
Auto pre-loader
Paper breaker
Main Technical Parameter
Technical parameters of paper feeder
| Model | BHT-2100FC | BHT-1900FC | BHT-1650FC |
| Sheel Size | Max. 2100×1600mm Min. 650×450mm | Max. 1900×1400mm Min. 650×450mm | Max. 1650×1200mm Min. 650×450mm |
| Corrugated Board. Up To | 1-9mm | 1-9mm | 1-9mm |
| Batch Height | Max. 1800mm | Max. 1800mm | Max. 1800mm |
| Pile Weight | 1400kg | 1200kg | 1000kg |
| Machine Weight | 5000kg | 4500kg | 4000kg |
Technical parameters of die cutting machine
| Model | BHT-2100FC | BHT-1900FC | BHT-1650FC |
| Max. Sheet Size | 2100×1600mm | 1900×1400mm | 1650×1200mm |
| Min. Sheet Size | 750×650mm | 650×500mm | 650×500mm |
| Max. Die Cutting Size | 2080×1580mm | 1880×1380mm | 1630×1180mm |
| Inner Chase Size | 2120×1630mm | 1920×1430mm | 1670×1230mm |
| Stock Range | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper |
| Min. Gripper Waste | 10-18mm | 10-18mm | 10-18mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm |
| Max. Die Cutting Speed | 4000s/h | 5000s/h | 6000s/h |
| Max. Die Cutting Pressure | 450ton | 450ton | 400ton |
| Total Power Required | 47kw | 40kw | 38kw |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Mobile Lower Platen Adjusting Range | ±1.5mm | ±1.5mm | ±1.5mm |
| Machine Dimension | 14370×6360×2970mm | 13377×6360×2902mm | 11638×5254×2776mm |
| Machine Weight | 51T | 46T | 40T |
Sharding machine technical parameters
| Model | BHT-2100FC | BHT-1900FC | BHT-1650FC |
| Sheel Size | Max. 2100mm, Min. 650mm | Max. 1900mm, Min. 650mm | Max. 1650mm, Min. 650mm |
| Min. Batch Dimension In Machine Direction | 200mm | 200mm | 200mm |
| Max. Batch Thickness | 300mm | 300mm | 300mm |
| Min. Batch Thickness | 20mm | 20mm | 20mm |
| Batch Passage Height From The Floor | 900mm (adjustable) | 900mm (adjustable) | 900mm (adjustable) |
| Machine Weight | 5000kg | 4500kg | 4000kg |
Drawing
Features Introduced
Converting System Integration means devices combined in line to reduce the manual work, optimize and speed up the flow of products within a single process. Among different modes of production lines, it is the most popular and practical mode in the global market with higher stability. In this system, the automatic prefeeder is one important part linked with the feeder of automatic diecutter to raise feeding efficiency and relieve the workload of operator at maximum that manual work cannot totally reach. The automatic breaker in line with the delivery unit of diecutter automatically separates blanks from multiple ups and save considerable labor costs compared to manual work. Along with the advantages in efficiency and cost, the system is especially able to be customized at particular client demands, products techniques and processes. Nowadays this sytem has become the new tendency interested by a large number of brand owners in the corrugated board packaging industry.
Partial Introduction
Auto pre-loader
Paper breaker
Main Technical Parameter
Technical parameters of paper feeder
| Model | BHT-2100EFC | BHT-1900EFC | BHT-1650EFC |
| Sheel Size | Max. 2100×1600mm Min. 650×450mm | Max. 1900×1400mm Min. 650×450mm | Max. 1650×1200mm Min. 650×450mm |
| Corrugated Board. Up To | 1-9mm | 1-9mm | 1-9mm |
| Batch Height | Max. 1800mm | Max. 1800mm | Max. 1800mm |
| Pile Weight | 1400kg | 1200kg | 1000kg |
| Machine Weight | 5000kg | 4500kg | 4000kg |
Technical parameters of die cutting machine
| Model | BHT-2100EFC | BHT-1900EFC | BHT-1650EFC |
| Max. Sheet Size | 2100×1600mm | 1900×1400mm | 1650×1200mm |
| Min. Sheet Size | 750×650mm | 650×500mm | 650×500mm |
| Max. Die Cutting Size | 2080×1580mm | 1880×1380mm | 1630×1180mm |
| Inner Chase Size | 2120×1630mm | 1920×1430mm | 1670×1230mm |
| Stock Range | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper | ≤9mm corrugated paper, F, E, B, C, A and AB corrugated paper |
| Min. Gripper Waste | 10-18mm | 10-18mm | 10-18mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm |
| Max. Die Cutting Speed | 4000s/h | 5000s/h | 6000s/h |
| Max. Die Cutting Pressure | 450ton | 450ton | 400ton |
| Total Power Required | 47kw | 40kw | 38kw |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Mobile Lower Platen Adjusting Range | ±1.5mm | ±1.5mm | ±1.5mm |
| Machine Dimension | 14250×6360×2970mm | 13252×6360×2902mm | 11638×5254×2776mm |
| Machine Weight | 52T | 47T | 41T |
Sharding machine technical parameters
| Model | BHT-2100EFC | BHT-1900EFC | BHT-1650EFC |
| Sheel Size | Max. 2100mm, Min. 650mm | Max. 1900mm, Min. 650mm | Max. 1650mm, Min. 650mm |
| Min. Batch Dimension In Machine Direction | 200mm | 200mm | 200mm |
| Max. Batch Thickness | 300mm | 300mm | 300mm |
| Min. Batch Thickness | 20mm | 20mm | 20mm |
| Batch Passage Height From The Floor | 900mm (adjustable) | 900mm (adjustable) | 900mm (adjustable) |
| Machine Weight | 5000kg | 4500kg | 4000kg |
Drawing