Partial Introduction
Feeder unit
Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.
Feeding table
Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1060/1080 |
| 01. Monolithic conveying section wall panel of ductile iron | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm | 〇 |
| 07. Main electric left and right trimming device for paper feed stack | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 10. Side gauge, front gauge paper photoelectric detection | 〇 |
| 11. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 12. Electromechanical double detector | 〇 |
| 13. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 14. Pneumatic lifting device for feeding frame | 〇 |
| 15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 16. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Imported synchronous belt, belt wheel drive | 〇 |
| 09. Main drive inlet pneumatic clutch brake device | 〇 |
| 10. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 11. Die-cut plate frame adopts center line fast positioning device structure | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 14. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1060/1080 |
| Maximum Sheet Size | 1060×760mm/1080×780mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1050×750mm/1070×770mm |
| Minimum Gripper Margin | 9-17mm |
| Inner Chase Size | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm |
| Max.die Cutting Force | 300T |
| Max.working Speed | 7500s/h |
| Max. Feeder Pile Height | 1600mm (With wooden pallet) |
| Max. Delivery Pile Height | 1400mm (With wooden pallet) |
| Machine Dimensions | 6286×4257×2367mm (L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 16T/17T |
| Main Motor Wattage | 11kw |
| Full Load Wattage | 16.9kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder unit
Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.
Feeding table
Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
Stripping unit
Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1060CE/1080CE |
| 01. Monolithic conveying section wall panel of ductile iron | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm | 〇 |
| 07. Main electric left and right trimming device for paper feed stack | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 10. Side gauge, front gauge paper photoelectric detection | 〇 |
| 11. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 12. Electromechanical double detector | 〇 |
| 13. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 14. Pneumatic lifting device for feeding frame | 〇 |
| 15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 16. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Imported synchronous belt, belt wheel drive | 〇 |
| 09. Main drive inlet pneumatic clutch brake device | 〇 |
| 10. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 11. Die-cut plate frame adopts center line fast positioning device structure | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 14. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle | 〇 |
| 04. Clean the waste transmission mechanism | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1060CE/1080CE |
| Maximum Sheet Size | 1060×760mm/1080×780mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1050×750mm/1070×770mm |
| Minimum Gripper Margin | 9-17mm |
| Inner Chase Size | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm |
| Max.die Cutting Force | 300T |
| Max.working Speed | 7500s/h |
| Max. Feeder Pile Height | 1600mm (With wooden pallet) |
| Max. Delivery Pile Height | 1400mm (With wooden pallet) |
| Machine Dimensions | 7313×4257×2367mm(L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 17T/18T |
| Main motor wattage | 11kw |
| Full Load Wattage | 16.9kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder unit
Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.
Feeding table
Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1060A/1080A |
| 01. Monolithic conveying section wall panel of ductile iron | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm | 〇 |
| 07. Main electric left and right trimming device for paper feed stack | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 10. Side gauge, front gauge paper photoelectric detection | 〇 |
| 11. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 12. Electromechanical double detector | 〇 |
| 13. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 14. Pneumatic lifting device for feeding frame | 〇 |
| 15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 16. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Ductile iron heavy main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Imported synchronous belt, belt wheel drive | 〇 |
| 09. Main drive inlet pneumatic clutch brake device | 〇 |
| 10. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 11. Die-cut plate frame adopts center line fast positioning device structure | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 14. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1060A/1080A |
| Maximum Sheet Size | 1060×760mm/1080×780mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1050×750mm/1070×770mm |
| Minimum Gripper Margin | 9-17mm |
| Inner Chase Size | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm |
| Max.die Cutting Force | 600T |
| Max.working Speed | 7500s/h |
| Max. Feeder Pile Height | 1600mm (With wooden pallet) |
| Max. Delivery Pile Height | 1400mm (With wooden pallet) |
| Machine Dimensions | 6284×4307×2367mm (L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 18.5T/19T |
| Main motor wattage | 15kw |
| Full Load Wattage | 21kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Features Introduction
The MHC-1060AR/1080AR Automatic Die Cutting Machine with Heating System is key equipment for printing finishing such as die cut, crease and embossing etc. Unique drive gears are adopted such as high-precision indexing mechanism, pneumatic closed up, pneumatic clutch, overload protection, automatic compression relief etc, to ensure stable and high speed running of the machine. This machine is equipped with practical and reliable mechanism such as pre-stack device, secondary delivery mechanisms, manual sampling, etc, which ensure the excellent performance of the machine. Electrical components and driving elements of internationally known brands to ensure die cutting precision and reliability of running. Also man-machine interface is able to monitor machine running status, troubleshooting and indicating relevant help information which fully actualized man-machine communication.
Partial Introduction
Feeder unit
Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.
Feeding table
Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1060AR/1080AR |
| 01. Monolithic conveying section wall panel of ductile iron | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm | 〇 |
| 07. Main electric left and right trimming device for paper feed stack | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 10. Side gauge, front gauge paper photoelectric detection | 〇 |
| 11. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 12. Electromechanical double detector | 〇 |
| 13. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 14. Pneumatic lifting device for feeding frame | 〇 |
| 15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 16. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Ductile iron heavy main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Imported synchronous belt, belt wheel drive | 〇 |
| 09. Main drive inlet pneumatic clutch brake device | 〇 |
| 10. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 11. Die-cut plate frame adopts center line fast positioning device structure | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 14. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
| Hot Pressure Control System | |
| 01. Temperature zone independent control system, effectively control the heating temperature of hot stamping plate. Ensure the whole heating system temperature control more balanced and stable | 〇 |
| 02. The hot pressing part adopts 7 inch temperature control touch screen, easy to operate | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1060AR/1080AR |
| Maximum Sheet Size | 1060×760mm/1080×780mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1050×750mm/1070×770mm |
| Max. Embossing Area | 1050×750mm/1070×770mm |
| Minimum Gripper Margin | 9-17mm |
| Inner Chase Size | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm |
| Embossing Accuracy | ≤±0.1mm |
| Max.die Cutting Force | 600T |
| Max.working Speed | 7500s/h (Die cutting)；7500s/h (Hot pressing) |
| Max. Feeder Pile Height | 1600mm (With wooden pallet) |
| Max. Delivery Pile Height | 1400mm (With wooden pallet) |
| Electric-heated System | 20 temperature ranges, 40-180℃ is adjustable |
| Machine Dimensions | 6284×4307×2367mm(L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 18.5T/19T |
| Main Motor Wattage | 15kw |
| Full Load Wattage | 35kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Partial Introduction
Feeder unit
Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.
Feeding table
Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
Stripping unit
Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1060ACE/1080ACE |
| 01. Monolithic conveying section wall panel of ductile iron | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm | 〇 |
| 07. Main electric left and right trimming device for paper feed stack | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 10. Side gauge, front gauge paper photoelectric detection | 〇 |
| 11. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 12. Electromechanical double detector | 〇 |
| 13. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 14. Pneumatic lifting device for feeding frame | 〇 |
| 15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section | 〇 |
| 16. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Ductile iron heavy main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Imported synchronous belt, belt wheel drive | 〇 |
| 09. Main drive inlet pneumatic clutch brake device | 〇 |
| 10. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 11. Die-cut plate frame adopts center line fast positioning device structure | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 14. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle | 〇 |
| 04. Clean the waste transmission mechanism | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die – cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1060ACE/1080ACE |
| Maximum Sheet Size | 1060×760mm/1080×780mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1050×750mm/1070×770mm |
| Minimum Gripper Margin | 9-17mm |
| Inner Chase Size | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm |
| Max.die Cutting Force | 600T |
| Max.working Speed | 7500s/h |
| Max. feeder pile height | 1600mm (With wooden pallet) |
| Max. delivery pile height | 1400mm (With wooden pallet) |
| Machine Dimensions | 7313×4307×2367mm(L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 19.5T/20T |
| Main motor wattage | 15kw |
| Full Load Wattage | 21kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Features Introduction
The MHC-1060ACER/1080ACER Automatic Die Cutting Machine with Heating System is key equipment for printing finishing such as die cut, crease and embossing etc. Unique drive gears are adopted such as high-precision indexing mechanism, pneumatic closed up, pneumatic clutch, overload protection, automatic compression relief etc, to ensure stable and high speed running of the machine. This machine is equipped with practical and reliable mechanism such as pre-stack device, secondary delivery mechanisms, manual sampling, etc, which ensure the excellent performance of the machine. Electrical components and driving elements of internationally known brands to ensure die cutting precision and reliability of running. Also man-machine interface is able to monitor machine running status, troubleshooting and indicating relevant help information which fully actualized man-machine communication.
Partial Introduction
Feeder unit
Four pick up and four forward suck heads with angle adjustment to handle different kinds of materials.
Feeding table
Synchronizing device to adjust the sheet positioning to the front lay by hand during production,Sheet hold-down device (guiding the sheets to the front lays).
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
Stripping unit
Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1060ACER/1080ACER |
| 01. Monolithic conveying section wall panel of ductile iron | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm | 〇 |
| 07. Main electric left and right trimming device for paper feed stack | 〇 |
| 08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 10. Side gauge, front gauge paper photoelectric detection | 〇 |
| 11. Paper arrives before the gauge, slow down the function of paper | 〇 |
| 12. Electromechanical double detector | 〇 |
| 13. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 14. Pneumatic lifting device for feeding frame | 〇 |
| 15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No proof, test pressure and so on can be arbitrarily separated and closed on the conveying part | 〇 |
| 16. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Ductile iron heavy main body and left and right wall panels and upper platform, lower platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Imported synchronous belt, belt wheel drive | 〇 |
| 09. Main drive inlet pneumatic clutch brake device | 〇 |
| 10. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 11. Die-cut plate frame adopts center line fast positioning device structure | 〇 |
| 12. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 13. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 14. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism | 〇 |
| 02. You can choose whether to use the waste cleaning function | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle | 〇 |
| 04. Clean the waste transmission mechanism | 〇 |
| 05. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
| Hot Pressure Control System | |
| 01. Temperature zone independent control system, effectively control the heating temperature of hot stamping plate. Ensure the whole heating system temperature control more balanced and stable | 〇 |
| 02. The hot pressing part adopts 7 inch temperature control touch screen, easy to operate | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1060ACER/1080ACER |
| Maximum Sheet Size | 1060×760mm/1080×780mm |
| Minimum Sheet Size | 400×350mm |
| Maximum Cutting Size | 1050×750mm/1070×770mm |
| Max. Embossing Area | 1050×750mm/1070×770mm |
| Minimum Gripper Margin | 9-17mm |
| Inner Chase Size | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm |
| Embossing Accuracy | ≤±0.1mm |
| Max.die Cutting Force | 600T |
| Max.working Speed | 7500s/h (Die cutting)；7500s/h (Hot pressing) |
| Max. Feeder Pile Height | 1600mm (With wooden pallet) |
| Max. Delivery Pile Height | 1400mm (With wooden pallet) |
| Electric-heated System | 20 temperature ranges, 40-180℃ is adjustable |
| Machine Dimensions | 7313×4307×2367mm(L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 19.5T/20T |
| Main Motor Wattage | 15kw |
| Full Load Wattage | 35kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
Drawing
Features Introduction
MHC Series Automatic Die Cutting Machine is equipped with servo motor control system, thus makes sure thick and thin paper feeding function effectively, paper feeding system can be divided into three types: 1. single piece of paper feeding function (for 4 – 8mm corrugated paper), 2. two pieces of overlapping paper feeding function (for 2 – 4mm corrugated paper), 3. multiple pieces of overlapping paper feeding function (for to 250g – 2mm paper). This machine including both manual paper feeding and automatic feeder paper feeding function. On condition of flat corrugated paper, automatic feeder paper feeding is accepted with raising efficiency and reducing workforce. Manual paper feeding comes in handy on condition of uneven corrugated paper. This machine maintains multi-operational function, and its development is combined with advantages of similar products in domestic and overseas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die cutting. Other parts are adopted such as intermittent mechanism with high precision, pneumatic clutch and pneumatic closed up mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting. Transducer is adopted to control the main motor in achieving step-less speed variation.
This machine is equipped with sensors and safety device to ensure normal operation of machine and safety of workers.
Partial Introduction
Feeder unit
Servo motor conveyor positioning device
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650 series adopt chain driven system
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Electric appliance unit
Adopts electrical components of world famous brands(MOELLER\OMRON) for better performance and in time and local after-sale-service and maintenance.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1100E/1300E/1500E/1650E |
| 01. Feida head lift type device (hand-self integrated, dual-use) | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 07. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 08. Side gauge, front gauge paper photoelectric detection | 〇 |
| 09. Servo motor conveying positioning device | 〇 |
| 10. Three ways of paper feeding: Sheet feeding (suitable for 4-8mm corrugated board) Double sheet overlapping feed (suitable for 2-4mm corrugated board) Multiple overlapping paper feeding (suitable for 250g-2mm paper) | 〇 |
| 11. Electromechanical double detector | 〇 |
| 12. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 13. Pneumatic lifting device for feeding frame | 〇 |
| 14. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100E) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300E/1500E/1650E) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100E) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100E) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300E/1500E/1650E) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 16. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100E | MHC-1300E | MHC-1500E | MHC-1650E |
| Maximum Sheet Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Minimum Sheet Size | 400×350mm | 470×420mm | 470×420mm | 550×500mm |
| Maximum Cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Minimum Gripper Margin | 7000s/h | 5000s/h | 5000s/h | 4000s/h |
| Cutting Rule Height | 11kw | 11kw | 15kw | 15kw |
| Inner Chase Size | 300T | 300T | 300T | 300T |
| Stock Range | 16T | 18T | 20T | 22T |
| Max.die Cutting Force | 6550×4250×2350mm (L: paper prepared track included, W: platform included) | 8900×4400×2300mm (L: paper prepared track included, W: platform included) | 9250×4600×2300mm (L: paper prepared track included, W: platform included) | 9650×5000×2500mm (L: paper prepared track included, W: platform included) |
| Scope Of Application | ≥250g white board, ≤7mm corrugated paper, E、B、C、A and AB corrugated paper | ≥250g white board, ≤8.5mm corrugated paper, E、B、C、A and AB corrugated paper | ≥350g white board, ≤8.5mm corrugated paper, E、B、C、A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
MHC Series Automatic Die Cutting Machine is equipped with servo motor control system, thus makes sure thick and thin paper feeding function effectively, paper feeding system can be divided into three types: 1. single piece of paper feeding function (for 4 – 8mm corrugated paper), 2. two pieces of overlapping paper feeding function (for 2 – 4mm corrugated paper), 3. multiple pieces of overlapping paper feeding function (for to 250g – 2mm paper). This machine including both manual paper feeding and automatic feeder paper feeding function. On condition of flat corrugated paper, automatic feeder paper feeding is accepted with raising efficiency and reducing workforce. Manual paper feeding comes in handy on condition of uneven corrugated paper. This machine maintains multi-operational function, and its development is combined with advantages of similar products in domestic and overseas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die cutting. Other parts are adopted such as intermittent mechanism with high precision, pneumatic clutch and pneumatic closed up mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting. Transducer is adopted to control the main motor in achieving step-less speed variation.
This machine is equipped with sensors and safety device to ensure normal operation of machine and safety of workers.
Partial Introduction
Feeder unit
Servo motor conveyor positioning device
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650 series adopt chain driven system
Stripping unit
Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Electric appliance unit
Adopts electrical components of world famous brands(MOELLER\OMRON) for better performance and in time and local after-sale-service and maintenance.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1100EC/1300EC/1500EC/1650EC |
| 01. Feida head lift type device (hand-self integrated, dual-use) | 〇 |
| 02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper | 〇 |
| 03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment | 〇 |
| 04. Three feida head anti-collision devices | 〇 |
| 05. Horizontal paper parting and blowing device | 〇 |
| 06. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita | 〇 |
| 07. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| 08. Side gauge, front gauge paper photoelectric detection | 〇 |
| 09. Servo motor conveying positioning device | 〇 |
| 10. Three ways of paper feeding: Sheet feeding (suitable for 4-8mm corrugated board) Double sheet overlapping feed (suitable for 2-4mm corrugated board) Multiple overlapping paper feeding (suitable for 250g-2mm paper) | 〇 |
| 11. Electromechanical double detector | 〇 |
| 12. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 13. Pneumatic lifting device for feeding frame | 〇 |
| 14. PLC and electronic CAM control the timing of the whole machine | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100EC) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300EC/1500EC/1650EC) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100EC) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100EC) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300EC/1500EC/1650EC) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 16. Equipped with air storage tank to ensure the stable air pressure | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism (MHC-1100EC) | 〇 |
| 02. You can choose whether to use the waste cleaning function (MHC-1100EC) | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle (MHC-1100EC) | 〇 |
| 04. Clean the waste transmission mechanism (MHC-1100EC) | 〇 |
| 05. Adopt upper and lower double frame waste cleaning mechanism (MHC-1300EC/1500EC/1650EC) | 〇 |
| 06. Adopt male and female models to achieve all kinds of waste (MHC-1300EC/1500EC/1650EC) | 〇 |
| 07. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100EC) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die – cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100EC | MHC-1300EC | MHC-1500EC | MHC-1650EC |
| Maximum Sheet Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Minimum Sheet Size | 400×350mm | 470×420mm | 470×420mm | 550×500mm |
| Maximum Cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Minimum Gripper Margin | 7000s/h | 5000s/h | 5000s/h | 4000s/h |
| Cutting Rule Height | 11kw | 11kw | 15kw | 15kw |
| Inner Chase Size | 300T | 300T | 300T | 300T |
| Stock Range | 17T | 19T | 21T | 23T |
| Max.die Cutting Force | 7700×4250×2350mm (L: paper prepared track included, W: platform included) | 10125×4400×2300mm (L: paper prepared track included, W: platform included) | 10650×4600×2300mm (L: paper prepared track included, W: platform included) | 11160×5000×2500mm (L: paper prepared track included, W: platform included) |
| Scope Of Application | ≥250g white board, ≤7mm corrugated paper, E、B、C、A and AB corrugated paper | ≥250g white board, ≤8.5mm corrugated paper, E、B、C、A and AB corrugated paper | ≥350g white board, ≤8.5mm corrugated paper, E、B、C、A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from f flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650/1900 series adopt chain driven system
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1100F/1300F/1500F/1650F/1900F |
| 01. High speed precision frontier paper feeding device, high precision paper feeding, strong suction, not easy to slip, can stably transport various types of corrugated paper | 〇 |
| 02. The special polyethylene ester paper feeding rubber wheel is combined with the palisade paper holder and air cushion to ensure the smooth and accurate transportation of heavy and warped paperboard | 〇 |
| 03. Variable frequency suction air volume fine-tuning device, to adapt to the different thickness from F to five corrugated paper feeding requirements | 〇 |
| 04. Pneumatic side push baffle (left and right sides) | 〇 |
| 05. The left and right baffle can be adjusted independently or synchronously. The slanting front baffle can be fine-adjusted before and after, up and down to reduce the pressure of the paper under the paper pile, and feed the paper more smoothly | 〇 |
| 06. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| 07. Upper and lower height adjustment device, according to paper and thickness adjustment, paper feeding more smooth and stable | 〇 |
| 08. Front and back position adjustment device, can be adjusted according to bite size | 〇 |
| 09. Non-stop adjusting device for feeding step | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100F) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300F/1500F/1650F/1900F) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100F) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100F) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300F/1500F/1650F/1900F) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100F) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| 06. Non-stop rolling shutter paper collecting device (MHC-1300F/1500F/1650F/1900F) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100F | MHC-1300F | MHC-1500F | MHC-1650F | MHC-1900F |
| Max. Sheet Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm | 1900×1400mm |
| Min. Sheet Size | 470×450mm | 470×470mm | 470×470mm | 650×500mm | 650×550mm |
| Max. Die Cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm | 1870×1380mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h | 3500s/h |
| Min. Gripper Waste | 12mm | 12mm | 12mm | 12mm | 12mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm | 23.8mm | 23.8mm |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Air Pump Displacement | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) |
| Min. Motor Power | 11kw | 11kw | 15kw | 15kw | 18.5kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T | 300T |
| Machine Weight | 16T | 18T | 20T | 22T | 30T |
| Machine Dimension | 7000×4250×2350mm | 7400×4510×2300mm | 8100×4710×2300mm | 8230×5140×2500mm | 8700×5880×2530mm |
| Stock Range | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from f flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650 series adopt chain driven system
Stripping unit
Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1100FC/1300FC/1500FC/1650FC |
| 01. High speed precision frontier paper feeding device, high precision paper feeding, strong suction, not easy to slip, can stably transport various types of corrugated paper | 〇 |
| 02. The special polyethylene ester paper feeding rubber wheel is combined with the palisade paper holder and air cushion to ensure the smooth and accurate transportation of heavy and warped paperboard | 〇 |
| 03. Variable frequency suction air volume fine-tuning device, to adapt to the different thickness from F to five corrugated paper feeding requirements | 〇 |
| 04. Pneumatic side push baffle (left and right sides) | 〇 |
| 05. The left and right baffle can be adjusted independently or synchronously. The slanting front baffle can be fine-adjusted before and after, up and down to reduce the pressure of the paper under the paper pile, and feed the paper more smoothly | 〇 |
| 06. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| 07. Upper and lower height adjustment device, according to paper and thickness adjustment, paper feeding more smooth and stable | 〇 |
| 08. Front and back position adjustment device, can be adjusted according to bite size | 〇 |
| 09. Non-stop adjusting device for feeding step | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100FC) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300FC/1500FC/1650FC) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100FC) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100FC) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300FC/1500FC/1650FC) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism (MHC-1100FC) | 〇 |
| 02. You can choose whether to use the waste cleaning function (MHC-1100FC) | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle (MHC-1100FC) | 〇 |
| 04. Clean the waste transmission mechanism (MHC-1100FC) | 〇 |
| 05. Adopt upper and lower double frame waste cleaning mechanism (MHC-1300FC/1500FC/1650FC) | 〇 |
| 06. Adopt male and female models to achieve all kinds of waste (MHC-1300FC/1500FC/1650FC) | 〇 |
| 07. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100FC) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| 06. Non-stop rolling shutter paper collecting device (MHC-1300FC/1500FC/1650FC) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100FC | MHC-1300FC | MHC-1500FC | MHC-1650FC |
| Max. Sheet Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Min. Sheet Size | 470×450mm | 470×470mm | 470×470mm | 650×500mm |
| Max. Die Cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h |
| Min. Gripper Waste | 12mm | 12mm | 12mm | 12mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm | 23.8mm |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Air Pump Displacement | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) |
| Min. Motor Power | 11kw | 11kw | 15kw | 15kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T |
| Machine Weight | 17T | 19T | 21T | 23T |
| Machine Dimension | 8000×4250×2350mm | 8760×4510×2300mm | 9140×4710×2300mm | 9580×5140×2500mm |
| Stock Range | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from f flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650/1900 series adopt chain driven system
Paper collecting unit
Automatic delivery with non – stop curtain. This curtain moves into the delivery to catch the arriving sheets during the pile exchange.two blowers for paper collection can ensure neat collection of thin and thick papers.
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1300FE/1500EF/1650EF/1900EF |
| 01. High precision bottom suction cup paper feeding feida, feida at the bottom of the non-stop suction nozzle, vacuum adsorption way to send cardboard into the paper pressing roller, not easy to scratch the printing surface | 〇 |
| 02. Pneumatic side push baffle (right side) | 〇 |
| 03. Electrically controlled paper feed roller | 〇 |
| 04. Press paper and front gauge, double sheet detection device accurate response | 〇 |
| 05. Front hook adjustment device, cardboard bending up and down can be adjusted | 〇 |
| 06. Non-stop adjusting device for feeding step | 〇 |
| 07. Front and back position adjustment device, can be adjusted according to the size of the bite | 〇 |
| 08. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| Die-cutting Unit | |
| 01. The main body of ductile iron, upper platform and lower moving platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Main drive inlet pneumatic clutch brake device | 〇 |
| 09. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 10. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate | 〇 |
| 11. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 12. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| 05. Non-stop rolling shutter paper collecting device | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1300EF | MHC-1500EF | MHC-1650EF | MHC-1900EF |
| Max. Sheet Size | 1290×940mm | 1500×1100mm | 1650×1200mm | 1900×1400mm |
| Min. Sheet Size | 470×470mm | 470×470mm | 650×500mm | 650×550mm |
| Max. Die Cutting Size | 1280×920mm | 1480×1080mm | 1620×1180mm | 1870×1380mm |
| Max. Working Speed | 5000s/h | 5000s/h | 4000s/h | 3500s/h |
| Min. Gripper Waste | 12mm | 12mm | 12mm | 12mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm | 23.8mm |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Air Pump Displacement | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) |
| Min. Motor Power | 11kw | 15kw | 15kw | 18.5kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T |
| Machine Weight | 18T | 20T | 22T | 30T |
| Machine Dimension | 7400×4510×2300mm | 8100×4710×2300mm | 8230×5140×2500mm | 8700×5880×2530mm |
| Stock Range | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
Lead edge feeder
Top gear and precise Lead Edge Feeder design, allowed consistent feeding with various quality corrugated board.
New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignment even warped board.
Fine vacuum suction adjustment through inverter adapts to wide range stock from f flute to double wall corrugate.
Sheet transmission and alignment section
Selectable left and right side push lays to ensure accurate alignment.
Advanced non-stop adjustment of feeding timing, reduce down time.
Front gauge non-stop back and forth adjustable to accommodate variation in gripper margin.
Timing belt driven device
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650 series adopt chain driven system
Stripping unit
Adopt center line system,Upper and lower stripping tool mounting frame can be pulled out for job set up and make ready.
Auto Non-stop Collecting Device
● 1100 series equipped with manual non-stop collecting device
● 1300/1500/1650/1900 series equipped with auto non-stop collecting device
Auto lubrication system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1300EFC/1500EFC/1650EFC |
| 01. High precision bottom suction cup paper feeding feida, feida at the bottom of the non-stop suction nozzle, vacuum adsorption way to send cardboard into the paper pressing roller, not easy to scratch the printing surface | 〇 |
| 02. Pneumatic side push baffle (right side) | 〇 |
| 03. Electrically controlled paper feed roller | 〇 |
| 04. Press paper and front gauge, double sheet detection device accurate response | 〇 |
| 05. Front hook adjustment device, cardboard bending up and down can be adjusted | 〇 |
| 06. Non-stop adjusting device for feeding step | 〇 |
| 07. Front and back position adjustment device, can be adjusted according to the size of the bite | 〇 |
| 08. Right and left side positioning push gauge to ensure accurate positioning of cardboard side | 〇 |
| Die-cutting Unit | |
| 01. The main body of ductile iron, upper platform and lower moving platform | 〇 |
| 02. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 03. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 06. Import main drive chain | 〇 |
| 07. Imported intermittent divider | 〇 |
| 08. Main drive inlet pneumatic clutch brake device | 〇 |
| 09. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 10. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate | 〇 |
| 11. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 12. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Stripping Unit | |
| 01. Adopt upper and lower double frame waste cleaning mechanism | 〇 |
| 02. Adopt male and female models to achieve all kinds of waste | 〇 |
| 03. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate | 〇 |
| 05. Non-stop rolling shutter paper collecting device | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die – cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1300EFC | MHC-1500EFC | MHC-1650EFC |
| Max. Sheet Size | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Min. Sheet Size | 470×470mm | 470×470mm | 650×500mm |
| Max. Die Cutting Size | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Max. Working Speed | 5000s/h | 5000s/h | 4000s/h |
| Min. Gripper Waste | 12mm | 12mm | 12mm |
| Min. Gripper Margin | 6-12mm | 6-12mm | 6-12mm |
| Cutting Rule Height | 23.8mm | 23.8mm | 23.8mm |
| Electrical Power | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH | 380V, 50HZ, 3PH |
| Air Pump Displacement | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) | Air compressor displacement 1.05m3/min， 12kg/cm2– ( prepared by user) |
| Min. Motor Power | 11kw | 15kw | 15kw |
| Max. Working Pressure | 300T | 300T | 300T |
| Machine Weight | 19T | 21T | 23T |
| Machine Dimension | 8760×4510×2300mm | 9140×4710×2300mm | 9580×5140×2500mm |
| Stock Range | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
The second generation of MHC series Semi-automatic Die Cutting The Machine’ s development is combined with advantages of similar products in domestic and over seas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die-cutting. Other parts are adopted such as intermittent mechanism with high precision, air clutch, pneumatic locking mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting.
Transducer is adopted to control the main motor in achieving step-less speed variation.
Configurations
| Feeding Unit | MHC-1100B/1300B/1500B/1650B/1900B |
| 01. Procedure feeding section | 〇 |
| 02. With monitoring video device, you can see the operation of the paper receiving section | 〇 |
| 03. 10.4 inch color screen shows the working state of the machine | 〇 |
| 04. With pre-code paper stacking mechanism, high efficiency | 〇 |
| 05. Adjustable left and right side setting device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100B) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300B/1500B/1650B/1900B) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100B) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100B) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300B/1500B/1650B/1900B) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack (MHC-1100B) | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100B) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate (MHC-1100B) | 〇 |
| 06. Manual sampling mechanism, easy to operate (MHC-1300B/1500B/1650B/1900B) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die – cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100B | MHC-1300B | MHC-1500B | MHC-1650B | MHC-1900B |
| Max. Paper Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm | 1900×1400mm |
| Min. Paper Size | 400×350mm | 470×420mm | 470×420mm | 550×500mm | 650×550mm |
| Max. Die-cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm | 1870×1380mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h | 3500s/h |
| Main Motor Wattage | 11kw | 11kw | 15kw | 15kw | 18.5kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T | 300T |
| Machine Weight | 13T | 15T | 17T | 20T | 26T |
| Overall Dimension | 6300×4200×2350mm (L: paper prepared track included, W: platform included) | 6600×4400×2300mm (L: paper prepared track included, W: platform included) | 6950×4600×2300mm (L: paper prepared track included, W: platform included) | 7150×5000×2500mm (L: paper prepared track included, W: platform included) | 8780×5880×2530mm (L: paper prepared track included, W: platform included) |
| Scope Of Application | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
The second generation of MHC series Semi-automatic Die Cutting The Machine’ s development is combined with advantages of similar products in domestic and over seas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die-cutting. Other parts are adopted such as intermittent mechanism with high precision, air clutch, pneumatic locking mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting.
Transducer is adopted to control the main motor in achieving step-less speed variation.
Configurations
| Feeding Unit | MHC-1100BC/1300BC/1500BC/1650BC |
| 01. Procedure feeding section | 〇 |
| 02. With monitoring video device, you can see the operation of the paper receiving section | 〇 |
| 03. 10.4 inch color screen shows the working state of the machine | 〇 |
| 04. With pre-code paper stacking mechanism, high efficiency | 〇 |
| 05. Adjustable left and right side setting device | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100BC) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300BC/1500BC/1650BC) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100BC) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100BC) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300BC/1500BC/1650BC) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 16. Equipped with air storage tank to ensure the stable air pressure (MHC-1100BC) | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism (MHC-1100BC) | 〇 |
| 02. You can choose whether to use the waste cleaning function (MHC-1100BC) | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle (MHC-1100BC) | 〇 |
| 04. Clean the waste transmission mechanism (MHC-1100BC) | 〇 |
| 05. Adopt upper and lower double frame waste cleaning mechanism (MHC-1300BC/1500BC/1650BC) | 〇 |
| 06. Adopt male and female models to achieve all kinds of waste (MHC-1300BC/1500BC/1650BC) | 〇 |
| 07. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack (MHC-1100BC) | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100BC) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate (MHC-1100BC) | 〇 |
| 06. Manual sampling mechanism, easy to operate (MHC-1300BC/1500BC/1650BC) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100BC | MHC-1300BC | MHC-1500BC | MHC-1650BC |
| Max. Paper Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Min. Paper Size | 400×350mm | 470×420mm | 470×420mm | 550×500mm |
| Max. Die-cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h |
| Main Motor Wattage | 11kw | 11kw | 15kw | 15kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T |
| Machine Weight | 14T | 16T | 18T | 21T |
| Overall Dimension | 7270×4200×2350mm (L: paper prepared track included, W: platform included) | 7800×4400×2300mm (L: paper prepared track included, W: platform included) | 8450×4600×2300mm (L: paper prepared track included, W: platform included) | 8700×5000×2500mm (L: paper prepared track included, W: platform included) |
| Scope Of Application | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
MHC series Semi-automatic Die Cutting Machine is equipped with front conveyor delivery mechanism. The two groups of pressing wheels and two times positioning function will make the products more flat, and improve the accuracy and speed. The machine’s development is combined with advantages of similar products in domestic and over seas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die-cutting. Other parts are adopted such as intermittent mechanism with high precision, air clutch, pneumatic locking mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting. Transducer is adopted to control the main motor in achieving step-less speed variation.
Partial Introduction
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650 series adopt chain driven system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
The fearure high precision, low noise and low abrasion.
Configurations
| Feeding Unit | MHC-1100BL/1300BL/1500BL/1650BL |
| 01. Procedure feeding section | 〇 |
| 02. With monitoring video device, you can see the operation of the paper receiving section | 〇 |
| 03. 10.4 inch color screen shows the working state of the machine | 〇 |
| 04. With pre-code paper stacking mechanism, high efficiency | 〇 |
| 05. Electromechanical double detector | 〇 |
| 06. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 07. Pneumatic lifting device for feeding frame | 〇 |
| 08. Adjustable rubber wheels and brush wheels ensure accurate positioning of front gauge and side return | 〇 |
| 09. After the secondary positioning, the paper die-cutting precision can be guaranteed | 〇 |
| 10. Fish scale paper feeding, smooth and accurate | 〇 |
| 11. Side gauge, front gauge paper photoelectric detection | 〇 |
| 12. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100BL) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300BL/1500BL/1650BL) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100BL) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100BL) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300BL/1500BL/1650BL) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack (MHC-1100BL) | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100BL) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate (MHC-1100BL) | 〇 |
| 06. Manual sampling mechanism, easy to operate (MHC-1300BL/1500BL/1650BL) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100BL | MHC-1300BL | MHC-1500BL | MHC-1650BL |
| Max. Paper Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Min. Paper Size | 400×350mm | 470×420mm | 470×420mm | 550×500mm |
| Max. Die-cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h |
| Main Motor Wattage | 11kw | 11kw | 15kw | 15kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T |
| Machine Weight | 14T | 16T | 18T | 21T |
| Overall Dimension | 7600×4200×2350mm (L: paper prepared track included, W: platform included) | 8100×4400×2300mm (L: paper prepared track included, W: platform included) | 8420×4600×2300mm (L: paper prepared track included, W: platform included) | 8620×5000×2500mm (L: paper prepared track included, W: platform included) |
| Scope Of Application | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
Features Introduction
MHC series Semi-automatic Die Cutting Machine is equipped with front conveyor delivery mechanism. The two groups of pressing wheels and two times positioning function will make the products more flat, and improve the accuracy and speed. The machine’s development is combined with advantages of similar products in domestic and over seas, is special equipment for packing products such as cartons and paper boxes. Gripper bars with high intensity are applicable to all kinds of cardboard, paperboard and corrugated paper. Frontal, back and side registration mechanism ensures great precision of die-cutting. Other parts are adopted such as intermittent mechanism with high precision, air clutch, pneumatic locking mechanism, programmable controller and man-machine interface. The interface can display various digital information of machine such as working speed, amount of paper processed, total running time, etc. It is easy to eliminate troubles according to the display of trouble shooting. Transducer is adopted to control the main motor in achieving step-less speed variation.
Partial Introduction
Taiwan high precision intermittent segmentation ensure high positional precision for long time usage.
● MHC1300/1500 series adopt timing belt driven system
● MHC1650 series adopt chain driven system
Adopt concentrated auto lubrication system to make sure the driven parts working better.
Configurations
| Feeding Unit | MHC-1100BLC/1300BLC/1500BLC/1650BLC |
| 01. Procedure feeding section | 〇 |
| 02. With monitoring video device, you can see the operation of the paper receiving section | 〇 |
| 03. 10.4 inch color screen shows the working state of the machine | 〇 |
| 04. With pre-code paper stacking mechanism, high efficiency | 〇 |
| 05. Electromechanical double detector | 〇 |
| 06. Import paper conveyor belt and stainless steel conveyor plate | 〇 |
| 07. Pneumatic lifting device for feeding frame | 〇 |
| 08. Adjustable rubber wheels and brush wheels ensure accurate positioning of front gauge and side return | 〇 |
| 09. After the secondary positioning, the paper die-cutting precision can be guaranteed | 〇 |
| 10. Fish scale paper feeding, smooth and accurate | 〇 |
| 11. Side gauge, front gauge paper photoelectric detection | 〇 |
| 12. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements | 〇 |
| Die-cutting Unit | |
| 01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform (MHC-1100BLC) | 〇 |
| 02. The main body of ductile iron, upper platform and lower moving platform (MHC-1300BLC/1500BLC/1650BLC) | 〇 |
| 03. Imported worm gear, worm with 40CR crankshaft | 〇 |
| 04. Rotary device for die cutting bottom plate and cutter template | 〇 |
| 05. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys | 〇 |
| 06. The whole set of imported anodized aluminum alloy tooth row and positioning structure 7 groups, each tooth row adopts adjustable tooth row structure | 〇 |
| 07. Import main drive chain | 〇 |
| 08. Imported intermittent divider | 〇 |
| 09. Imported synchronous belt, belt wheel drive (MHC-1100BLC) | 〇 |
| 10. Main drive inlet pneumatic clutch brake device | 〇 |
| 11. Japanese SMC pressure detection device, pressure is too low alarm | 〇 |
| 12. Die-cut plate frame adopts center line fast positioning device structure (MHC-1100BLC) | 〇 |
| 13. The connection between the die cutting plate and the die cutting plate frame adopts the form of grasping snail mother and screws, and the central positioning system is used when loading, which is fast and accurate (MHC-1300BLC/1500BLC/1650BLC) | 〇 |
| 14. Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation | 〇 |
| 15. The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil | 〇 |
| 16. Equipped with air storage tank to ensure the stable air pressure (MHC-1100BLC) | 〇 |
| Stripping Unit | |
| 01. Clean up the waste transmission mechanism (MHC-1100BLC) | 〇 |
| 02. You can choose whether to use the waste cleaning function (MHC-1100BLC) | 〇 |
| 03. Drive mechanism of waste – removing mould in the middle (MHC-1100BLC) | 〇 |
| 04. Clean the waste transmission mechanism (MHC-1100BLC) | 〇 |
| 05. Adopt upper and lower double frame waste cleaning mechanism (MHC-1300BLC/1500BLC/1650BLC) | 〇 |
| 06. Adopt male and female models to achieve all kinds of waste (MHC-1300BLC/1500BLC/1650BLC) | 〇 |
| 07. The installation of the middle waste cleaning board adopts the center line quick positioning installation mode, so that the operator can quickly install the waste cleaning board and improve the efficiency of changing the board | 〇 |
| Delivery Unit | |
| 01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack (MHC-1100BLC) | 〇 |
| 02. Paper collecting and paper leveling device | 〇 |
| 03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up | 〇 |
| 04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving (MHC-1100BLC) | 〇 |
| 05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate (MHC-1100BLC) | 〇 |
| 06. Manual sampling mechanism, easy to operate (MHC-1300BLC/1500BLC/1650BLC) | 〇 |
| Electrical Parts | |
| 01. Huichuan PLC control system | 〇 |
| 02. The die-cutting part adopts 10.4 – inch touch screen | 〇 |
| 03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts | 〇 |
| 04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action | 〇 |
Note: This allocation sheet is for reference only, the formal allocation sheet is subject to the contract. Standard configuration: 〇; Optional: △
Main Technical Parameter
| Model | MHC-1100BLC | MHC-1300BLC | MHC-1500BLC | MHC-1650BLC |
| Max. Paper Size | 1100×790mm | 1290×940mm | 1500×1100mm | 1650×1200mm |
| Min. Paper Size | 400×350mm | 470×420mm | 470×420mm | 550×500mm |
| Max. Die-cutting Size | 1070×770mm | 1280×920mm | 1480×1080mm | 1620×1180mm |
| Max. Working Speed | 7000s/h | 5000s/h | 5000s/h | 4000s/h |
| Main Motor Wattage | 11kw | 11kw | 15kw | 15kw |
| Max. Working Pressure | 300T | 300T | 300T | 300T |
| Machine Weight | 15T | 17T | 19T | 22T |
| Overall Dimension | 8600×4200×2350mm (L: paper prepared track included, W: platform included) | 9300×4400×2300mm (L: paper prepared track included, W: platform included) | 9840×4600×2300mm (L: paper prepared track included, W: platform included) | 10100×5000×2500mm (L: paper prepared track included, W: platform included) |
| Scope Of Application | ≤7mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper | ≤8.5mm corrugated paper, E, B, C, A and AB corrugated paper |
Drawing
